Dash Panel Redesign & Switch Upgrades

Faded plastic and broken toggles date your boat. We custom fabricate sleek, high-gloss acrylic dash panels with stainless steel LED push-buttons to give your helm a clean, modern look.
Rating:
100% of 100
$150 /hr

Labor estimate Quoted after inspection

Book sends us a ticket; nothing is charged online. Before any work you get a written estimate for labor, parts and the trip fee, and nothing is done without your OK.

Trip fee By distance, one way: $30 in San Pedro, $50 in Long Beach
  • San Pedro$30
  • Wilmington, Terminal Island$40
  • Long Beach: Shoreline, Rainbow Harbor$50
  • Long Beach Marina, Alamitos Bay$60
  • Redondo Beach$60
  • Seal Beach, Huntington Harbour$75
  • Marina del Rey$85
  • Newport Beach$110

Farther away: $25 plus $2.50 a mile, one way from our San Pedro shop. No trip fee when the boat comes to our shop, or for plan members. The work of a visit is at least $150; the trip fee is on top.

Registered in California
Breeze Marine Boat Service LLC, San Pedro
Where we work
At your slip from Marina del Rey to Newport Beach, or in our San Pedro shop

About this service

Helm Modernization

The Glass Cockpit
Transformation.

Nothing dates a boat like faded plastic dash panels and broken toggle switches. We design and fabricate high-gloss custom acrylic panels and install modern stainless push-buttons to make your helm look brand new.

Custom Acrylic Fabrication

We don't just patch holes. We measure your dash, and a new "High Gloss Black" or Carbon Fiber acrylic panel is cut to fit, covering old mounting holes and giving a sleek, flush surface for new electronics.

The "Ring Light" Switch

Replace those flimsy plastic toggles with IP67-rated Stainless Steel Push-Buttons (Bocatech style). Featuring LED ring illumination, they look clean and modern and withstand the marine environment.

Wiring Triage

Behind many old dashes is a "rat's nest" of dangerous wiring. We strip it back, label every circuit, install proper bus bars, and set up fuse protection following ABYC practice.

The Retrofit Process.

From CAD design to final installation.

01

Template & Design

We remove your old gauges and electronics, then create a precise template of your helm area to account for curvature and mounting points.

02

Fabrication

We transfer the design to CAD, and the new panel is cut from marine-grade acrylic or Starboard with precise holes for your new switches.

03

Pre-Wiring

We "bench build" the switch panel, creating a clean wiring harness with heat-shrink terminals before bringing it to the boat.

04

Install & Test

We mount the panel, connect the harness to your boat's DC distribution, and test every pump, light, and blower for function.

Clean. Functional. Beautiful.

A helm you can be proud of.

Material Options.

Choose the finish that fits your vessel.

High Gloss Acrylic Black / White "Glass Look"
Carbon Fiber Real or Vinyl Wrap
Starboard Matte Textured HDPE

Common Questions

Can you fit new electronics?

Yes. This is a good time to upgrade from old analog gauges to a new touchscreen Chartplotter. The panel is cut specifically to flush-mount your new MFD.

How long does it take?

Boat dash panel fabrication typically takes 3-5 days. Installation and rewiring on the boat usually take 1-2 days depending on the complexity of the existing wiring.

Upgrade Your View.

Get a quote for a custom dash panel.

Start Dash Project

Custom Boat Dash Panels Built Around Your Helm

Every boat dash has its own curves and mounting points, so custom boat dash panels start with a template of your helm rather than a stock blank. We transfer that template to CAD, and the new boat dash panel is cut from marine-grade acrylic or Starboard, with precise holes for switches, gauges and displays. An acrylic boat dash covers the old mounting holes with a flush surface; a black acrylic boat dash in high gloss gives the classic glass look, and white, carbon fiber and matte Starboard finishes are also available for marine dash panels.

A custom boat dash is also the right time to add a touchscreen chartplotter, since the panel can be cut to flush-mount the new display. To get a quote, send photos of your current boat dash panels, the boat's make and model, and a list of the electronics you want to keep or add.

Upgrade your boat's performance and safety with a modernized dashboard experience. Our team specializes in customizing boat dash panels to meet your unique needs, from LED display upgrades to ergonomic design overhauls. Whether you're looking for improved visibility or enhanced functionality, our expert technicians will work closely with you to bring your vision for the perfect boat dash panels to life.

Boat Dash Panels: FAQ

What is involved in a typical boat dash panel redesign?

A typical boat dash panel redesign involves assessing the existing layout and components, identifying areas for improvement, and selecting new materials or technologies that meet your performance and aesthetic goals. Our team will work with you to create a custom design plan tailored to your specific needs.

Can I upgrade my boat's electrical system as part of a dash panel redesign?

Yes, our technicians can integrate electrical upgrades into the dash panel redesign process, ensuring seamless integration and maximum performance from your new components. This may include upgrading switch panels, installing new gauges or displays, or integrating advanced navigation systems.

When it comes to upgrading your boat dash panels, consider the functionality and aesthetics you need. A simple swap of gauges or a full redesign can breathe new life into your vessel's interior. Key factors include selecting the right materials for durability and visibility, ensuring seamless integration with existing systems, and choosing LED or analog displays that fit your style – whether classic or modern.

Reviews 2

Write Your Own Review
You're reviewing:Dash Panel Redesign & Switch Upgrades
Your Rating

Questions 7

Related Posts

Call