Toilet repair boat
Marine toilet and head repair in Long Beach for Jabsco, Groco, VacuFlush and more: clogs, leaks, pumps, hoses and odor control. Book a mobile visit.
- 5 services
- Labor $150/hr
- At your slip or in the shop
Marine Toilet Repair in Long Beach and San Pedro
We repair marine toilets, holding tanks and the pumps and hoses between them, at your slip, dock or storage yard from Marina del Rey to Newport Beach. We work on manual heads, electric macerating toilets and vacuum flush systems.
What the work covers
- Marine toilet repair: clogs, leaks, worn pump seals and joker valves, and electric toilets that will not flush.
- Vacuum flush system seals and service for systems that lose vacuum or run on their own.
- Macerator pump replacement and troubleshooting for pumps that hum, jam or will not run.
- Holding tank odor control and hose replacement: new sanitation hose, plus vent and tank checks to stop the smell at its source.
- Marine watermaker installation for owners who want to make fresh water aboard.
Parts are quoted with the job.
When to call
- A smell in the cabin that comes back after cleaning
- Water creeping into the bowl between flushes
- A toilet that is hard to pump or will not flush
- A vacuum flush pump that cycles when nobody uses the head
- A macerator that hums but does not pump
- Leaks at the base, the hoses or the holding tank
Questions about marine toilet repair
Why does my boat smell even after I clean the head?
Sanitation hose lets odor through its walls as it ages. Rub a damp cloth on the hose, then smell the cloth. If it smells, the hose is permeated and replacing it is usually the fix. A blocked holding tank vent can also cause odor.
What can go into a marine toilet?
Only human waste and toilet paper, ideally a paper that breaks down quickly. Wipes and paper towels are a common cause of clogs in marine toilets and macerator pumps.
Book a visit: submit a ticket with the boat, the type of toilet, where it is kept and what it is doing, or call (562) 542-7296.
-
#1032 Nathan, boat owner in Newport Beach asks asks
Can proper hose maintenance improve the performance of my holding tank?
-
Absolutely. Fresh hoses and regular odor control keep the system flowing efficiently, prevent clogs, minimize odors, and ensure a reliable and sanitary onboard experience.
-
-
#1030 Aiden, fishing boat owner in Long Beach asks asks
Do you also provide odor control services during hose replacement?
-
Yes, we treat the tank with safe marine odor control solutions, clean vent lines, and ensure the entire system is sanitized for long-lasting odor prevention.
-
-
#1028 Ella, motorboat owner in Newport Beach asks asks
How often should holding tank hoses be replaced?
-
We recommend inspecting hoses annually and replacing them every 3–5 years, depending on usage and environmental conditions, especially in saltwater boats.
-
-
#1026 Mason, cruiser owner in Long Beach asks asks
Can old hoses cause leaks or system failures?
-
Yes, cracked or hardened hoses can leak, allowing waste or odors to escape. Timely hose replacement prevents damage to the boat and maintains reliable operation of the holding tank.
-
-
#1024 Liam, sailboat owner in Newport Beach asks asks
How can I control odors in my holding tank between services?
-
Regular use of marine-safe odor control chemicals, proper tank ventilation, and routine flushing help prevent buildup and maintain a clean, odor-free system.
-
-
#1022 Clara, yacht owner in Long Beach asks asks
What does holding tank hose replacement include?
-
We remove old or degraded hoses, inspect fittings, and install high-quality marine hoses. The system is tested to ensure leak-free operation and proper venting to prevent odors.
-
-
#1020 Avery, motorboat owner in Newport Beach asks asks
Why am I getting bad odors from my holding tank?
-
Bad odors usually come from worn hoses, vent issues, or buildup of waste and bacteria inside the tank. Proper hose replacement and odor control treatments restore sanitary conditions and reduce unpleasant smells.
-
-
#1018 Nathan, boat owner in Newport Beach asks asks
Can maintaining the macerator pump improve overall sanitation system performance?
-
Absolutely. Regular maintenance ensures smooth pumping, prevents clogs, reduces odors, and keeps your marine sanitation system efficient and reliable.
-
-
#1016 Aiden, fishing boat owner in Long Beach asks asks
Do you also troubleshoot macerator pump problems?
-
Yes, we diagnose issues such as clogs, electrical problems, or improper flow, and provide repair or replacement solutions to restore reliable operation.
-
-
#1014 Ella, motorboat owner in Newport Beach asks asks
How often should a macerator pump be inspected or serviced?
-
We recommend inspecting your pump at least once a year or every 100–150 operating hours. Boats in heavy-use or saltwater environments may require more frequent checks.
-