Question 1

Do you repair and replace bilge pumps?

Lukas · Accepted Answer

Yes – we service all types of bilge systems, including automatic and manual pumps. We replace failed pumps, float switches, wiring, and clean out debris to restore reliable operation.

Question 2

What are signs that my bilge system isn’t working properly?

Lukas · Accepted Answer

If you notice standing water, a musty smell, pump cycling constantly, or no response from the float switch, your bilge system needs inspection. We recommend servicing it before the problem becomes serious.

Question 3

Can you clean and disinfect the bilge area?

Lukas · Accepted Answer

Yes – we offer full bilge cleaning, including removal of sludge, oil residue, and mold. We use marine-safe cleaners to sanitize the bilge and improve pump performance and odor control.

Question 4

How much does it cost to repair a bilge system?

Lukas · Accepted Answer

Basic bilge pump replacement or float switch repair starts at $200–$400. Full system rewiring, cleaning, and restoration typically costs $500–$900 depending on boat size and access.

Question 5

Do you install backup or high-water alarms in the bilge?

Lukas · Accepted Answer

Absolutely. We install secondary pumps, high-water alarms, and battery backups for added safety. These systems provide extra protection in case of pump failure or heavy leaks.

Question 6

Do you offer emergency bilge system repair?

Lukas · Accepted Answer

Yes – we provide emergency services for active water intrusion or pump failure. If your bilge isn’t draining and water is rising, call us immediately. We’re equipped for rapid dockside response.

Question 7

Do repairs come with a warranty?

Lukas · Accepted Answer

Yes, all bilge system repairs and installations include a 3–12 month labor warranty. New pumps and switches include manufacturer warranties. You’ll receive a full service report after the job.

Question 8

What is an automatic float switch and why is it important?

Fryderyk Florczak · Accepted Answer

An automatic float switch detects water levels in your bilge and activates the bilge pump when needed. This prevents flooding and protects your boat’s engine and electronics from water damage.

Question 9

How do I know if my float switch needs replacement?

Fryderyk Florczak · Accepted Answer

Common signs include the bilge pump not activating, intermittent operation, or physical damage to the switch. We also test the switch’s response and continuity during inspection to ensure it’s fully operational.

Question 10

Can a faulty float switch cause my boat to sink?

Fryderyk Florczak · Accepted Answer

Yes, a malfunctioning float switch can prevent the bilge pump from turning on, which could allow water to accumulate. Regular inspection and timely replacement are essential to avoid potential flooding.

Question 11

How is the automatic float switch replaced?

Fryderyk Florczak · Accepted Answer

We remove the old switch, inspect the wiring and pump, and install a high-quality replacement. After installation, we test the new switch to ensure it activates the pump correctly under all conditions.

Question 12

Do you offer warranty on the replacement switch?

Fryderyk Florczak · Accepted Answer

Yes, all replacement float switches come with a manufacturer’s warranty, and our installation work is guaranteed for 6 to 12 months. You also receive documentation for service and warranty purposes.

Question 13

Can you upgrade my float switch to a more reliable model?

Fryderyk Florczak · Accepted Answer

Absolutely. We can replace your old float switch with a more durable or high-capacity model to match your boat’s bilge pump and operating conditions, ensuring maximum reliability.

Question 14

How often should I check or replace my float switch?

Fryderyk Florczak · Accepted Answer

We recommend inspecting your float switch at least once a year, especially before the boating season. Replacement is advised if there are signs of wear, corrosion, or inconsistent operation.

Question 15

What is a high-water alarm and why should my boat have one?

Fryderyk Florczak · Accepted Answer

A high-water alarm alerts you when the bilge water level rises above normal limits. It provides an early warning of leaks, failed bilge pumps, or flooding, helping prevent serious damage or sinking.

Question 16

How does a high-water alarm work on a boat?

Fryderyk Florczak · Accepted Answer

The alarm uses a dedicated float switch or sensor mounted higher than the primary bilge pump. When water reaches this level, it triggers an audible and/or visual alarm to alert the operator immediately.

Question 17

Can a high-water alarm work if my boat is unattended?

Fryderyk Florczak · Accepted Answer

Yes. When connected to the boat’s electrical system, the alarm can activate even when the boat is unattended. Optional upgrades include remote monitoring or integration with onboard alarm panels.

Question 18

What is included in your high-water alarm installation service?

Fryderyk Florczak · Accepted Answer

Our service includes proper sensor placement, wiring inspection, alarm installation, and full system testing. We ensure the alarm activates reliably and does not interfere with existing bilge pump systems.

Question 19

Do you test the alarm after installation?

Fryderyk Florczak · Accepted Answer

Yes, every installation includes functional testing. We simulate high-water conditions to confirm the alarm activates correctly and verify sound levels and indicator lights for clear alerts.

Question 20

Is a high-water alarm required or recommended by insurance?

Fryderyk Florczak · Accepted Answer

While not always required, many insurance providers strongly recommend high-water alarms. Having one installed can reduce risk, improve safety compliance, and may positively impact insurance evaluations.

Professional bilge repair boat

Keep your boat in top condition with our selection of bilge repair products. Whether you're dealing with minor leaks or more serious issues, we have everything you need to ensure your boat stays afloat and safe on the water.