Shop By
Now Shopping by
  1. Manufacturer Breeze Marine Boat Service Remove This Item

Home Repair

Boat Water Pump Repair

Boat water pump repair in Long Beach and San Pedro: raw water pump rebuilds, impellers, thermostats and circulation pumps. Get a quote.

  • 5 services
  • At your slip or in the shop
We can't find products matching the selection.

Boat Water Pump Repair in Long Beach and San Pedro

We repair boat water pumps and cooling systems at your slip, dock or storage yard from Marina del Rey to Newport Beach, or at our San Pedro shop. An engine that cannot move cooling water will overheat, so a weak pump is worth fixing before it causes damage.

What the work covers

We work on Mercury, MerCruiser, Yamaha, Volvo Penta, Indmar, Yanmar and Cummins engines, and parts are quoted with the job. If the pump checks out and the engine still runs hot, blocked exhaust manifolds or risers are a common cause; see manifold repair.

Signs of a cooling problem

  • The temperature gauge climbs, or the overheat alarm sounds
  • A weak or missing telltale stream on an outboard
  • Steam, or less water than usual, from the exhaust
  • Coolant loss, or a drip from the pump
  • A squeal from the belt or pump at startup

Questions about boat water pumps

How often should the impeller be replaced?

Follow your engine maker's interval. Replace it sooner if the engine ran without water, even briefly. A dry impeller can lose vanes, and the broken pieces can block the cooling passages.

Can the pump be fixed with the boat in the water?

Pumps mounted on inboard engines can usually be serviced at the slip, with the seacock closed. On outboards and some sterndrives the pump sits in the lower unit or drive, so that job is done with the boat out of the water; a drive is never removed while the boat is in the water.

Book a visit: submit a ticket with the boat, the engine, where it is kept and what the temperature gauge is doing, or call (562) 542-7296.

See also: heart of your boat engine rebuild.

See also: when to replace raw water impeller.

Questions

Items 11 to 20 of 21 total

Page
Show per page
  1. #581 Common question asks Dec 14, 2025

    Do you test both raw water and closed-loop cooling systems?

    1. Fryderyk Florczak answers Dec 14, 2025

      Yes. We service both raw water–cooled and closed-loop (freshwater) cooling systems. We verify proper coolant circulation, thermostat operation, hose condition, and overall cooling efficiency based on your engine type and manufacturer specifications.

  2. #579 Common question asks Dec 14, 2025

    What happens if I keep running the engine with a bad thermostat or pump?

    1. Fryderyk Florczak answers Dec 14, 2025

      Continuing to operate the engine can lead to severe overheating, warped cylinder heads, blown head gaskets, or internal engine damage. Early testing and repair of the circulation pump or thermostat can prevent major and expensive engine failures.

  3. #577 Common question asks Dec 14, 2025

    Can you test the circulation pump and thermostat without replacing parts right away?

    1. Fryderyk Florczak answers Dec 14, 2025

      Yes. We perform full diagnostic testing before recommending replacement. This includes temperature verification, flow testing, thermostat opening temperature checks, and inspection for leaks or internal wear. Only faulty components are replaced, helping you avoid unnecessary costs.

  4. #575 Common question asks Dec 14, 2025

    What are the signs of a worn impeller, a bad thermostat or a failing circulation pump?

    1. Fryderyk Florczak answers Dec 14, 2025

      Watch for overheating, especially at idle, a weak stream of water at the exhaust or telltale, swinging temperature readings or alarms. A worn impeller or scored pump housing moves too little water at low rpm; a stuck thermostat makes the engine run hot (stuck closed) or never warm up (stuck open); a failing circulation pump may leak at the weep hole or make bearing noise.

  5. #79 Common question asks Jun 20, 2025

    Do you offer a warranty on water pump repairs?

    1. Lukas answers Jun 20, 2025

      Yes. Our workmanship is warranted for 90 days from the invoice date; new pumps and impellers carry their manufacturer's warranty. Your invoice lists the work and the parts, so you can keep it with your engine records.

  6. #77 Common question asks Jun 20, 2025

    Can a bad water pump damage my marine engine?

    1. Lukas answers Jun 20, 2025

      Definitely. A faulty pump can lead to severe overheating, warped heads, or engine failure. That’s why we recommend annual impeller checks and pump inspections – especially before the season starts.

  7. #75 Common question asks Jun 20, 2025

    Do you service both seawater and freshwater cooling systems?

    1. Lukas answers Jun 20, 2025

      Yes, we service both raw water (seawater) and closed-loop freshwater cooling systems. We inspect heat exchangers, replace water pumps, clean strainers, and flush lines for proper flow and cooling.

  8. #73 Common question asks Jun 20, 2025

    How much does it cost to repair or replace a marine water pump?

    1. Lukas answers Jun 20, 2025

      Labor is $150 an hour plus parts and a trip fee per visit by distance, from $30 in San Pedro to $110 in Newport Beach. An impeller or pump replacement usually takes 1-2 hours; pumps that are hard to reach or inside a sterndrive take longer. You get a written estimate before any work starts.

  9. #71 Common question asks Jun 20, 2025

    Can you replace the impeller on-site?

    1. Lukas answers Jun 20, 2025

      Often, yes. Engine-mounted raw water pumps on inboards, and many outboards with the motor tilted up, can be done at your slip. On sterndrives with the pump inside the drive, such as the MerCruiser Alpha, the drive has to come off, so the boat must be out of the water. When we know the engine model, we bring the right impeller kit to the visit.

  10. #69 Common question asks Jun 20, 2025

    How do I know if my water pump needs repair?

    1. Lukas answers Jun 20, 2025

      Look for symptoms like engine overheating, weak water flow from the exhaust, abnormal engine temperature alarms, or a whining noise near the pump. A failing impeller or blockage is often the cause.

Items 11 to 20 of 21 total

Page
Show per page