Marine Electronics Installation and Audio Upgrades
Marine electronics and boat audio installation in Long Beach: Garmin, Simrad, radar, autopilots and stereos with clean wiring. Get a quote.
- 2 services
- At your slip or in the shop
Marine Electronics and Audio Installation in Long Beach and San Pedro
We install and integrate marine electronics and audio at your slip, dock or storage yard from Marina del Rey to Newport Beach. That covers chartplotters, radar, fishfinders, autopilots and sound systems, wired and networked so they work together at the helm.
What the work covers
- Chartplotter, radar and fishfinder integration: mounting displays, radar and transducers, running the cables and connecting it all on one network.
- Marine autopilot installation and calibration: fitting the drive unit, heading sensor and controls, then calibrating the system on the water.
- Marine electronics installation and repair for gear already aboard, including units that lose power, position or data.
- Marine audio upgrades: head units, speakers, amplifiers and subwoofers made for salt air and sun.
- NMEA 2000 networking so engine data, instruments and displays share information.
Good electronics work depends on the wiring behind the dash: marine-grade wire, a fused feed for each device and labeled cables that are easy to trace later. Parts are quoted with the job.
When to call
- You are replacing an old plotter or adding radar
- Displays that do not show engine data, depth or heading
- A fishfinder with a weak or noisy picture
- An autopilot that wanders off course or will not hold a heading
- Speakers that crackle, cut out or get lost under engine noise
Questions about marine electronics installation
Will new electronics work with my older ones?
Often, yes. Many units share data over NMEA 2000 or the older NMEA 0183, and some need an adapter or gateway. We check what you have before the job is quoted.
Does an autopilot install need a sea trial?
Yes. The setup starts at the dock, then the compass and steering response are calibrated underway, so part of the job happens on the water.
Book a visit: submit a ticket with the boat, the equipment you have or want, and where it is kept, or call (562) 542-7296.
For a safe and enjoyable time on the water, you need reliable marine electronics installation. Whether it's chartplotters for navigation, radar for safety or fishfinders to find your catch, we do marine electronics installation that integrates all these systems at your boat so they work together seamlessly at the helm. Our mobile technicians come to you in Long Beach and San Pedro, covering the entire LA Harbor area from Marina del Rey to Newport Beach.
Marine Electronics Installation: FAQ
What's included in a full marine electronics installation?
We cover everything needed for a complete system integration: mounting displays, installing radar and transducers, running cables, connecting it all on one network, and calibrating sensors for accurate readings. This ensures your chartplotter, radar, fishfinder, autopilot, and audio systems work together flawlessly.
Can you repair existing marine electronics?
Yes, we also do marine electronics installation and repair for gear already installed at your boat. Whether it's a faulty display, a malfunctioning transducer or an issue with the network connection, our mobile technicians diagnose and fix problems on-site in Long Beach and San Pedro.
-

#459 Common question asks
Do you install new marine electronics like GPS, radar, and chartplotters?
-

Yes — we install GPS chartplotters, radar systems, fishfinders, AIS, VHF radios, autopilots, and full helm electronics from all major brands including Garmin, Simrad, Raymarine, and Furuno.
-
