Shop By
Now Shopping by
  1. Manufacturer Breeze Marine Boat Service Remove This Item

Home Repair

Boat Carburetor Repair

Boat carburetor cleaning, rebuilds and tuning for outboard and sterndrive engines, at your slip from Marina del Rey to Newport Beach or at our shop.

  • 7 services
  • At your slip or in the shop
We can't find products matching the selection.

Boat Carburetor Repair in Long Beach and San Pedro

We clean, rebuild and tune marine carburetors at your slip, dock or storage yard from Marina del Rey to Newport Beach, or at our San Pedro shop. That includes older Mercury and Yamaha outboards and carbureted MerCruiser and Volvo Penta sterndrives.

What the work covers

A marine carburetor rebuild and tuning takes the carburetor apart, clears the jets and fuel passages, replaces gaskets and worn parts, and sets it up again on the engine. Parts are quoted with the job. Related work:

Signs your carburetor needs work

  • Hard starting, or the engine runs only with the choke on
  • Rough idle, or stalling when you shift into gear
  • Bogging or hesitation when you open the throttle
  • A fuel smell or fuel dripping from the carburetor: do not start the engine, air out the boat and have it checked
  • Black smoke or fouled spark plugs

Questions about boat carburetor repair

Why do boat carburetors clog?

Gasoline goes stale when a boat sits, and ethanol blends can leave varnish in the jets. Water in the fuel adds corrosion. Running the engine regularly, using a fuel stabilizer and fitting a fuel water separator all help.

Should I rebuild my carburetor or replace it?

Many carburetors rebuild well. If the body is cracked or badly corroded, we tell you and quote a replacement before any work is done.

Book a visit: submit a ticket with the boat, the engine, where it is kept and how it is running, or call (562) 542-7296.

See also: boat bogging at full throttle testing a marine fuel pump.

See also: re jetting a marine carburetor for high altitude lakes.

Questions

Items 11 to 20 of 21 total

Page
Show per page
  1. #553 Common question asks Dec 14, 2025

    Can improper carb synchronization damage my engine?

    1. Fryderyk Florczak answers Dec 14, 2025

      Yes. Poor synchronization can cause uneven cylinder loading, overheating, spark plug fouling, and premature engine wear. Over time, this may lead to valve damage or piston issues. Correct synchronization protects engine components and extends engine life.

  2. #551 Common question asks Dec 14, 2025

    How do you perform multi-carb synchronization and tuning?

    1. Fryderyk Florczak answers Dec 14, 2025

      On multi-carb 4-stroke engines we connect a vacuum gauge to each carburetor or intake runner and balance the throttle plates at idle and off-idle. On 2-stroke outboards we synchronize the throttle plates and linkage to the service manual. Then we set the idle mixture and linkage and check the engine under load across the rpm range.

  3. #549 Common question asks Dec 14, 2025

    What symptoms indicate that my carburetors need synchronization?

    1. Fryderyk Florczak answers Dec 14, 2025

      Common symptoms include rough or unstable idle, hesitation during acceleration, uneven engine sound, increased fuel consumption, and excessive vibration. If your engine feels unbalanced or doesn't respond smoothly, synchronization may be needed; we check the ignition, compression and vacuum leaks first.

  4. #547 Common question asks Dec 14, 2025

    What is multi-carb synchronization and why is it important?

    1. Fryderyk Florczak answers Dec 14, 2025

      Multi-carb synchronization ensures that all carburetors deliver the same amount of air-fuel mixture to each cylinder. When carbs are out of sync, the engine runs rough, loses power, and consumes more fuel. Proper synchronization restores smooth idle, balanced power delivery, and optimal engine performance.

  5. #29 Common question asks Jun 8, 2025

    Can a faulty carburetor damage my marine engine?

    1. Lukas answers Jun 8, 2025

      Yes. A malfunctioning carburetor can cause a lean or rich fuel mixture, leading to overheating, misfires or engine damage over time. Fixing it early helps prevent more expensive engine repairs.

  6. #27 Common question asks Jun 8, 2025

    Do you provide a warranty on carburetor repairs?

    1. Lukas answers Jun 8, 2025

      Yes. Our workmanship is warranted for 90 days from the invoice date; parts carry their manufacturer's warranty.

  7. #25 Common question asks Jun 8, 2025

    What brands of marine carburetors do you service?

    1. Lukas answers Jun 8, 2025

      We work on carburetors on MerCruiser/Quicksilver, OMC (Johnson/Evinrude) and older Yamaha two-stroke engines, as well as Holley Marine, Rochester (2GC and 4MV Quadrajet), Mercarb, Weber and Edelbrock marine carburetors.

  8. #23 Common question asks Jun 8, 2025

    Do you offer mobile carburetor repair service at the dock?

    1. Lukas answers Jun 8, 2025

      Yes. We diagnose, adjust and repair carburetors at your boat in San Pedro, Long Beach and our other harbors from Marina del Rey to Newport Beach. Each visit has a one-way trip fee by distance, from $30 in San Pedro to $110 in Newport Beach.

  9. #21 Common question asks Jun 8, 2025

    How long does a marine carburetor rebuild take?

    1. Lukas answers Jun 8, 2025

      The rebuild itself usually takes 2-4 hours of labor. When your boat is ready depends on getting the right kit for your carburetor, and we tell you the expected timing with your written estimate.

  10. #17 Common question asks Jun 8, 2025

    Can a marine carburetor be rebuilt instead of replaced?

    1. Lukas answers Jun 8, 2025

      Yes. In many cases a rebuild brings a carburetor back to proper function without the cost of a replacement. A rebuild includes full disassembly and cleaning, new gaskets and needle and seat, float adjustment, jet inspection and adjustment to the maker's settings. If the body is corroded or the throttle shafts are badly worn, we tell you and quote a replacement instead.

Items 11 to 20 of 21 total

Page
Show per page