Boat Paint Repair
Boat paint repair in Long Beach and San Pedro: chips, scratches, worn topside paint, bottom painting and boat names. Get a written estimate.
- 5 services
- Labor $150/hr
- Trip fee from $30
- At your slip or in the shop
Boat Paint Repair in Long Beach and San Pedro
We repair chips, scratches and worn paint on boats at your slip, dock or storage yard from Marina del Rey to Newport Beach, or at our San Pedro shop. Small damage is worth fixing early, before water gets under the coating.
What the work covers
- Boat paint repair: touch-up and restoration of chips, scratches and scuffs.
- Yacht coating repair for damaged coatings on larger boats.
- Bottom painting and antifouling at our San Pedro shop for trailer boats up to 26 ft: $55 a foot of boat length, paint included. Bigger boats and boats in the water get a written quote, and the work is done at a boatyard.
- Marine ceramic coating and oxidation removal, plus topside polishing and waxing.
- Teak deck sanding, caulking and restoration.
- Custom boat lettering and marine graphics for the boat's name and hailing port.
Signs your paint needs attention
- Chips or scratches through the paint
- Paint that is flaking, bubbling or lifting
- Topsides that look chalky or faded
- Worn bottom paint or growth on the hull
- A faded or peeling boat name
- Gray teak or open deck seams
Questions about boat paint repair
Is my boat painted or gelcoated?
Most fiberglass boats leave the factory with a gelcoat finish, and some are painted later. The repair is different for each, so we check the finish before quoting. For gelcoat chips and cracks, see fiberglass repair.
Why fix small chips right away?
A chip lets water reach the layer underneath. Over time that can lift the paint around it or, on metal parts, start corrosion. A small repair now is simpler than a larger one later.
Book a visit: submit a ticket with the boat, where it is kept and what the damage looks like, or call (562) 542-7296.
See also: fiberglass boat repair at the slip cracks chips and leaks.
See also: dock rash on gelcoat when a scratch needs real repair.
-

#1068 Common question asks
Do you repair scratches, blisters, and peeling coatings?
-

Yes. Scratches, chips and peeling paint or clear coat are repaired and refinished. Blisters are assessed first: some are only in the paint or gelcoat, while others mean moisture in the laminate and a larger repair, which goes to a boatyard, and we explain the options before any work.
-
-

#1066 Common question asks
Can coating repairs be matched to my yacht’s original color?
-

We tint gelcoat and paint to your boat's current, weathered color and blend the edges, so most repairs are hard to spot. On heavily faded or oxidized surfaces an exact match is not always possible, and we tell you before the work starts.
-
-

#1064 Common question asks
Why is damaged yacht coating a serious issue?
-

Damaged coatings expose fiberglass, metal, or gelcoat to UV rays, saltwater, and moisture, which can lead to corrosion, discoloration, and structural damage if left untreated.
-
-

#1062 Common question asks
What does professional yacht coating repair include?
-

Professional yacht coating repair includes inspecting damaged areas, repairing cracks or peeling coatings, surface preparation, and applying marine-grade coatings to restore protection and appearance.
-
-

#1060 Common question asks
Can teak deck restoration increase my boat’s value?
-

It can help, though we can't promise a figure. A well-kept teak deck looks better and is safer underfoot, and sound seams keep water from soaking into the deck below, which is costly to repair.
-
-

#1058 Common question asks
Do you use sealers or oils after teak restoration?
-

We offer optional teak treatments based on owner preference. Some clients prefer a natural weathered look, while others choose protective sealers to maintain color and reduce maintenance.
-
-

#1056 Common question asks
How often should teak decks be sanded and restored?
-

As seldom as possible. Each sanding removes wood, and a teak deck can only be sanded a limited number of times in its life. With gentle cleaning (a soft brush across the grain, no pressure washer) and seam repairs when needed, most decks can go many years between sandings, and we check how much wood is left above the seams and plugs before recommending one.
-
-

#1054 Common question asks
Can improper sanding damage a teak deck?
-

Yes, aggressive or uneven sanding can remove too much material and shorten the deck's lifespan. We sand only as much as it takes to remove the grey layer, so as much wood as possible stays on the deck.
-
-

#1052 Common question asks
What is included in teak deck restoration service?
-

The service includes professional sanding, seam inspection, caulking replacement if needed, deep cleaning, and optional teak treatment. Each step is done carefully to preserve plank thickness and structure.
-
-

#1050 Common question asks
How do I know if my teak deck needs re-caulking?
-

If the seams are cracked, shrinking, lifting, or missing material, re-caulking is needed. Proper caulking prevents water intrusion, protects the sub-deck, and keeps the teak planks secure.
-





