Boat Water Pump Repair
Boat water pump repair in Long Beach and San Pedro: raw water pump rebuilds, impellers, thermostats and circulation pumps. Get a quote.
- 5 services
- At your slip or in the shop
Boat Water Pump Repair in Long Beach and San Pedro
We repair boat water pumps and cooling systems at your slip, dock or storage yard from Marina del Rey to Newport Beach, or at our San Pedro shop. An engine that cannot move cooling water will overheat, so a weak pump is worth fixing before it causes damage.
What the work covers
- Raw water pump: a raw water pump rebuild with a new impeller, seals and wear parts as needed.
- Impeller and thermostat: impeller and thermostat service at your engine maker's interval, or sooner if the pump has run dry.
- Circulation pump: circulation pump replacement when the bearing or seal on the engine-driven pump fails.
- Leaks: cooling system pressure testing to find leaks in hoses, heat exchangers and closed cooling systems.
We work on Mercury, MerCruiser, Yamaha, Volvo Penta, Indmar, Yanmar and Cummins engines, and parts are quoted with the job. If the pump checks out and the engine still runs hot, blocked exhaust manifolds or risers are a common cause; see manifold repair.
Signs of a cooling problem
- The temperature gauge climbs, or the overheat alarm sounds
- A weak or missing telltale stream on an outboard
- Steam, or less water than usual, from the exhaust
- Coolant loss, or a drip from the pump
- A squeal from the belt or pump at startup
Questions about boat water pumps
How often should the impeller be replaced?
Follow your engine maker's interval. Replace it sooner if the engine ran without water, even briefly. A dry impeller can lose vanes, and the broken pieces can block the cooling passages.
Can the pump be fixed with the boat in the water?
Pumps mounted on inboard engines can usually be serviced at the slip, with the seacock closed. On outboards and some sterndrives the pump sits in the lower unit or drive, so that job is done with the boat out of the water; a drive is never removed while the boat is in the water.
Book a visit: submit a ticket with the boat, the engine, where it is kept and what the temperature gauge is doing, or call (562) 542-7296.
See also: heart of your boat engine rebuild.
See also: when to replace raw water impeller.
-

#67 Common question asks
Do you repair raw water pumps for boats?
-

Yes. We repair and replace raw water pumps on inboard, sterndrive and outboard engines, whether the problem is a leaking seal, a cracked housing or a failed impeller. We find the cause, give you a written estimate and test the cooling flow after the repair.
-
