Home Repair

Marine AC Repair

Boat air conditioning repair in Long Beach and San Pedro: Dometic and Cruisair service, descaling, reverse cycle heat and new AC installs. Book now.

  • 4 services
  • Labor $150/hr
  • Trip fee from $30
  • At your slip or in the shop
View as Grid List

4 Items

Set Descending Direction
  1. Marine AC Installation & System Upgrades
    Rating:
    100%
    $150 /hr
    Quoted after inspection
  2. Marine Air Conditioning & Refrigeration Service
    Rating:
    100%
    $150 /hr
    Usually 1–2 hours
  3. Marine HVAC Descaling & Acid Flushing
    Rating:
    100%
    $150 /hr
    Usually 2–4 hours
  4. Reverse Cycle Heating Troubleshooting
    Rating:
    100%
    $150 /hr
    About 1 hour to diagnose, then a quote
per page

Marine Air Conditioning Repair in Long Beach and San Pedro

We repair, service and install marine air conditioning at your slip, dock or storage yard from Marina del Rey to Newport Beach. That includes reverse cycle systems that heat as well as cool, and the raw water side that keeps them running.

What the work covers

Many AC faults start on the raw water side: a clogged strainer, a weak pump or growth in the lines. Refrigerant work, such as leak repair and recharging, is done by an EPA 608 certified technician we bring in or refer you to; their charge is listed on your estimate. Away from the dock, the AC usually runs on the generator; see generator repair. Parts are quoted with the job.

Signs your boat AC needs service

  • The unit runs but blows warm air
  • It shuts off with a high-pressure fault soon after starting
  • Little or no water from the AC discharge on the hull
  • Ice on the coil or lines, or water dripping into the cabin
  • Heat mode blows cold air

Questions about marine AC repair

Why does my boat AC keep shutting off?

A high-pressure shutdown usually means the unit cannot shed heat, most often from low raw water flow or a scaled condenser coil. Check the strainer first, and close the seacock before you open it. If the strainer is clean, the coil may need descaling or the pump may be failing.

Why does reverse cycle heat lose output?

Reverse cycle systems pull heat from the water around the boat, so they work less well as the water gets colder. If heat output drops while the water is still mild, the water flow, the reversing valve or the refrigerant charge may need attention. We check the water flow and the electrical side; refrigerant work goes to the EPA 608 certified technician we bring in or refer you to.

Book a visit: submit a ticket with the boat, where it is kept and what the AC is doing, or call (562) 542-7296.

See also: boat head not flushing troubleshooting a marine toilet.

See also: boat generator running but no power a diagnostic guide.

Questions

Items 11 to 20 of 35 total

Page
Show per page
  1. #1278 Common question asks Dec 21, 2025

    Can low refrigerant cause damage to my AC system?

    1. Fryderyk Florczak answers Dec 21, 2025

      Yes. Low refrigerant means there is a leak, and running short of charge cools poorly and overheats the compressor. The leak has to be found and repaired before the system is recharged; topping up alone just loses the gas again. That work is done by an EPA 608 certified technician we work with or refer you to.

  2. #1276 Common question asks Dec 21, 2025

    What does a marine AC refrigeration service include?

    1. Fryderyk Florczak answers Dec 21, 2025

      A routine service starts with the seawater side, which causes most marine AC problems: strainer, pump, through-hull and condenser coil, descaled if flow is poor. Then we check the air side (filters, evaporator coil, airflow), the electrics (capacitors, voltage, controls) and the temperature drop across the unit. Refrigerant work is done by an EPA 608 certified technician we work with or refer you to.

  3. #1274 Common question asks Dec 21, 2025

    What are common signs that my marine AC system needs service?

    1. Fryderyk Florczak answers Dec 21, 2025

      Reduced cooling, warm air output, unusual noises, icing on lines, or frequent system shutdowns are common indicators. These symptoms often point to poor seawater flow, dirty filters, a gas leak or failing components.

  4. #1272 Common question asks Dec 21, 2025

    Why is regular marine air conditioning refrigeration service important?

    1. Fryderyk Florczak answers Dec 21, 2025

      Marine AC units run on seawater in a harsh salt environment, so scale, growth and corrosion build up. Regular service of the seawater side, filters and electrics keeps them cooling well and helps prevent compressor failure and costly breakdowns.

  5. #1270 Common question asks Dec 21, 2025

    Can HVAC descaling improve overall onboard comfort and energy efficiency?

    1. Fryderyk Florczak answers Dec 21, 2025

      Yes. A clean HVAC system cools faster, maintains stable cabin temperatures, reduces electrical load, and provides quieter, more efficient operation throughout the boat.

  6. #1268 Common question asks Dec 21, 2025

    Do you inspect other components during HVAC acid flushing?

    1. Fryderyk Florczak answers Dec 21, 2025

      Yes. We check the raw water pump, hoses, strainer and discharge flow so the whole seawater cooling circuit works after the flush. If the problem is in the sealed refrigeration side of the unit, we refer it to a specialist.

  7. #1266 Common question asks Dec 21, 2025

    Does descaling help prevent HVAC system failures?

    1. Fryderyk Florczak answers Dec 21, 2025

      Yes. Removing internal buildup improves water flow, reduces operating pressure, and protects major components like compressors, pumps, and heat exchangers from premature failure.

  8. #1264 Common question asks Dec 21, 2025

    How often should marine HVAC descaling and acid flushing be performed?

    1. Fryderyk Florczak answers Dec 21, 2025

      In warm salt water like ours, we recommend a descaling flush about every two years, or sooner if the overboard stream weakens, the air is not as cold as it was, or high-pressure faults start. Systems that run a lot may need it more often.

  9. #1262 Common question asks Dec 21, 2025

    What are the signs that my HVAC system needs descaling?

    1. Fryderyk Florczak answers Dec 21, 2025

      Common signs include air that is not as cold as it used to be, frequent high-pressure shutdowns, a warmer cabin, or less water coming out of the overboard discharge.

  10. #1260 Common question asks Dec 21, 2025

    What is acid flushing and is it safe for my marine HVAC system?

    1. Fryderyk Florczak answers Dec 21, 2025

      Acid flushing pumps a mild descaling solution made for marine air conditioners through the seawater side of the condenser to dissolve scale and growth. Done correctly, with the right product, strength and time and a thorough fresh-water rinse afterward, it is safe for the condenser. It restores water flow and heat transfer; it does not stop corrosion.

Items 11 to 20 of 35 total

Page
Show per page