Home Repair

Bilge Pump Repair

Bilge pump repair and replacement in Long Beach and San Pedro: pumps, float switches, high-water alarms and bilge cleaning. Book a mobile visit.

  • 3 services
  • At your slip or in the shop
We can't find products matching the selection.

Bilge Pump Repair in Long Beach and San Pedro

We repair and test bilge pumps, float switches and high-water alarms at your slip, dock or storage yard from Marina del Rey to Newport Beach. The bilge pump protects the boat while you are away, so it has to switch on by itself and keep working.

What the work covers

We also check the pump's power feed, so the automatic circuit works while you are not aboard. If water is coming in through a damaged hull, the repair goes to a boatyard; fiberglass repair covers the small, non-structural repairs we do. If the boat is taking on water or anyone is in danger, call the Coast Guard on VHF channel 16 or 911 first. Parts are quoted with the job.

When to call

  • The pump runs often, or cycles when it has not rained
  • The pump runs nonstop, or stays off when you lift the float
  • More water than usual in the bilge
  • An oily sheen or a bad smell from the bilge
  • Corroded wires or connectors at the pump
  • A high-water alarm that sounds, or one that has never been tested

Questions about bilge pumps

Why does my bilge pump keep cycling?

Water is getting in from somewhere. Common sources are the shaft seal, hose connections, through-hull fittings, deck drains and rain. A check valve that leaks back can also make the pump cycle. We trace the source during the bilge inspection.

Do I need a high-water alarm if I have an automatic pump?

The alarm warns you when the pump has failed or cannot keep up with the water coming in. Without one, the first sign of trouble may be a boat sitting low at the dock.

Book a visit: submit a ticket with the boat, where it is kept and what the bilge pump is doing, or call (562) 542-7296.

See also: fiberglass boat repair at the slip cracks chips and leaks.

Questions

Items 21 to 21 of 21 total

Page
Show per page
  1. #136 Common question asks Jun 20, 2025

    Do you repair and replace bilge pumps?

    1. Lukas answers Jun 20, 2025

      Yes. We repair and replace automatic and manual bilge pumps, float switches, wiring and discharge hoses, and clean out the debris that jams pumps. A pump or float switch replacement usually takes 1-2 hours.

Items 21 to 21 of 21 total

Page
Show per page