Home Repair

Marine AC Repair

Boat air conditioning repair in Long Beach and San Pedro: Dometic and Cruisair service, descaling, reverse cycle heat and new AC installs. Book now.

  • 4 services
  • Labor $150/hr
  • Trip fee from $30
  • At your slip or in the shop
View as Grid List

4 Items

Set Descending Direction
  1. Marine AC Installation & System Upgrades
    Rating:
    100%
    $150 /hr
    Quoted after inspection
  2. Marine Air Conditioning & Refrigeration Service
    Rating:
    100%
    $150 /hr
    Usually 1–2 hours
  3. Marine HVAC Descaling & Acid Flushing
    Rating:
    100%
    $150 /hr
    Usually 2–4 hours
  4. Reverse Cycle Heating Troubleshooting
    Rating:
    100%
    $150 /hr
    About 1 hour to diagnose, then a quote
per page

Marine Air Conditioning Repair in Long Beach and San Pedro

We repair, service and install marine air conditioning at your slip, dock or storage yard from Marina del Rey to Newport Beach. That includes reverse cycle systems that heat as well as cool, and the raw water side that keeps them running.

What the work covers

Many AC faults start on the raw water side: a clogged strainer, a weak pump or growth in the lines. Refrigerant work, such as leak repair and recharging, is done by an EPA 608 certified technician we bring in or refer you to; their charge is listed on your estimate. Away from the dock, the AC usually runs on the generator; see generator repair. Parts are quoted with the job.

Signs your boat AC needs service

  • The unit runs but blows warm air
  • It shuts off with a high-pressure fault soon after starting
  • Little or no water from the AC discharge on the hull
  • Ice on the coil or lines, or water dripping into the cabin
  • Heat mode blows cold air

Questions about marine AC repair

Why does my boat AC keep shutting off?

A high-pressure shutdown usually means the unit cannot shed heat, most often from low raw water flow or a scaled condenser coil. Check the strainer first, and close the seacock before you open it. If the strainer is clean, the coil may need descaling or the pump may be failing.

Why does reverse cycle heat lose output?

Reverse cycle systems pull heat from the water around the boat, so they work less well as the water gets colder. If heat output drops while the water is still mild, the water flow, the reversing valve or the refrigerant charge may need attention. We check the water flow and the electrical side; refrigerant work goes to the EPA 608 certified technician we bring in or refer you to.

Book a visit: submit a ticket with the boat, where it is kept and what the AC is doing, or call (562) 542-7296.

See also: boat head not flushing troubleshooting a marine toilet.

See also: boat generator running but no power a diagnostic guide.

Questions

Items 21 to 30 of 35 total

Page
Show per page
  1. #1258 Common question asks Dec 21, 2025

    Why does my marine air conditioning system lose cooling efficiency over time?

    1. Fryderyk Florczak answers Dec 21, 2025

      Reduced cooling efficiency is often caused by mineral scale, salt buildup, and marine growth inside the HVAC heat exchanger. Descaling and acid flushing remove these deposits and restore proper heat transfer.

  2. #1256 Common question asks Dec 21, 2025

    Can proper troubleshooting extend the life of my HVAC system?

    1. Fryderyk Florczak answers Dec 21, 2025

      It helps. Fixing a water flow or electrical problem early takes strain off the compressor and wiring, which helps the system last longer and run more efficiently.

  3. #1254 Common question asks Dec 21, 2025

    Do you repair issues found during troubleshooting?

    1. Fryderyk Florczak answers Dec 21, 2025

      Yes. Once we find the cause, we can repair or replace seawater pumps, strainers, hoses, sensors, thermostats, reversing valve coils and control boards. Work on the sealed refrigerant system, such as recharging it or replacing the reversing valve, is done by an EPA 608 certified technician we work with or refer you to, and their charge is listed on your estimate.

  4. #1252 Common question asks Dec 21, 2025

    Is reverse cycle heating effective in cold weather?

    1. Fryderyk Florczak answers Dec 21, 2025

      Reverse cycle systems work well in mild to moderate cold and lose efficiency as the seawater gets colder; below about 40°F they struggle. Southern California water rarely gets that cold, so they work year-round here.

  5. #1250 Common question asks Dec 21, 2025

    Can electrical issues affect reverse cycle heating?

    1. Fryderyk Florczak answers Dec 21, 2025

      Absolutely. Faulty relays, control panels, thermostats, or wiring can prevent the system from switching into heating mode. Electrical testing is part of our troubleshooting process.

  6. #1248 Common question asks Dec 21, 2025

    Do you check seawater flow during diagnostics?

    1. Fryderyk Florczak answers Dec 21, 2025

      Yes, we inspect the raw water pump, the strainer (with the seacock closed), the hoses and the discharge flow. Restricted water flow is one of the most common reasons reverse cycle heating fails to operate efficiently.

  7. #1246 Common question asks Dec 21, 2025

    Why is my reverse cycle heater blowing cold air?

    1. Fryderyk Florczak answers Dec 21, 2025

      Common causes are a reversing valve that has not shifted (a burnt coil, no signal from the control or a stuck valve), poor seawater flow, a badly placed or faulty sensor, or a low refrigerant charge. We check the electrical side and the seawater flow; if the refrigerant charge or the valve itself is the problem, we refer you to an EPA 608 certified technician.

  8. #1244 Common question asks Dec 21, 2025

    What is reverse cycle heating on a boat?

    1. Fryderyk Florczak answers Dec 21, 2025

      Reverse cycle heating uses your marine air conditioning system to produce heat by reversing the refrigerant flow. It’s an efficient way to heat cabins in cooler weather without separate heaters.

  9. #457 Common question asks Nov 30, 2025

    Do you work with chilled-water systems and multi-zone AC setups?

    1. Breeze Marine answers Nov 30, 2025

      Yes, on the water side, pumps, controls and electrical work of multi-zone and chilled-water systems. Refrigerant work on the chiller is done by an EPA 608 certified technician we bring in or refer you to.

  10. #455 Common question asks Nov 30, 2025

    Can you add AC to a boat that never had it before?

    1. Breeze Marine answers Nov 30, 2025

      Yes — we design custom retrofit AC installations, adding ductwork, seawater pumps, return vents, and power connections even on boats that didn’t come with factory air conditioning.

Items 21 to 30 of 35 total

Page
Show per page