Boat Engine Repair
Boat engine repair in Long Beach and San Pedro for Mercury, Volvo Penta, Indmar, Yanmar, Cummins and more, from diagnostics to rebuilds. Get a quote.
- 5 services
- Labor $150/hr
- Trip fee from $30
- At your slip or in the shop
Boat Engine Repair in Long Beach and San Pedro
We find and fix boat engine problems, from hard starting and overheating to lost power. We work on Mercury, MerCruiser, Yamaha, Volvo Penta, Indmar, Yanmar and Cummins engines at your slip, dock or storage yard from Marina del Rey to Newport Beach, or at our San Pedro shop.
What the work covers
- Diagnosis and repair: marine engine repair starts with finding the cause, tracing the problem through fuel, ignition, compression and cooling.
- Overheating: overheating diagnosis and a cooling system flush. Common causes are a worn raw-water impeller, a clogged heat exchanger, a stuck thermostat or scale in the cooling passages.
- Exhaust: exhaust riser and elbow replacement when corrosion or leaks put the engine at risk of taking on water.
- Scheduled service: a 100-hour service or annual engine maintenance at your engine maker's interval. It typically covers oil and filters, fuel filters, the impeller and belts, plus a look at hoses, clamps and anodes.
- Valves and compression: valve adjustment and compression testing. Many engines need valve clearance set on a schedule, and compression numbers show the condition of the rings and valves.
When to call
- The engine cranks but will not start, or starts and dies
- The temperature gauge climbs or the overheat alarm sounds
- Rough idle, misfires or hesitation when you throttle up
- Lost top speed or RPM
- Smoke, a new noise or a fuel smell; with a fuel smell, leave the engine off and air out the boat
Questions about boat engine repair
Can you check my engine where the boat is kept?
Yes. We come to your slip, dock or storage yard from Marina del Rey to Newport Beach. If the check turns up a repair, we quote it before any work is done.
When does a repair turn into a rebuild?
When a compression test and inspection show wear across the engine, such as low compression on several cylinders, heavy oil use or damage from water or overheating. In that case we explain the rebuild option and quote it.
Book a visit: submit a ticket with the boat, where it is kept and what the engine is doing, or call (562) 542-7296.
Is your boat struggling to start, losing power, or overheating? Our marine engine repair service in Long Beach and San Pedro identifies and fixes the problem. We diagnose issues with fuel, ignition, compression, and cooling systems, including worn raw-water impellers, clogged heat exchangers, stuck thermostats, and scale buildup. From diagnosis to exhaust system repairs, we get your boat running smoothly again.
Marine Engine Repair: FAQ
What is involved in a marine engine repair?
Our process starts with a thorough examination of the fuel, ignition, compression, and cooling systems to pinpoint the cause of the problem. We then perform any necessary repairs or replacements, including cleaning or replacing raw-water impellers, heat exchangers, thermostats, or exhaust components.
Can you repair my boat's engine at its slip or in a storage yard?
Yes, our mobile service team comes to your boat wherever it is moored – from Marina del Rey to Newport Beach – so you don't need to trailer or transport it to a shop. We also have a San Pedro shop for larger projects and more extensive repairs.
See also: marine engine thermostat problems stuck open vs closed.
See also: boat engine overheating diagnosis order and cooling flush.
-

#214 Common question asks
Can the overhaul be done with the boat at my dock?
-

Yes. Whether your boat is in the water or on a trailer, we come to you in San Pedro, Wilmington, Long Beach, Redondo Beach, Seal Beach, Huntington Harbour, Marina del Rey and Newport Beach; farther places on request. Each visit has a one-way trip fee by distance, from $30 in San Pedro to $110 in Newport Beach.
-
-

#212 Common question asks
Do you check the cooling system during an overhaul?
-

Yes. Overheating is often caused by a clogged raw-water intake or strainer, a worn impeller or a stuck thermostat. We check the whole cooling system, find the cause and quote the repair before we do it.
-
-

#210 Common question asks
How much does a diesel engine overhaul cost?
-

Labor is $150 an hour, plus parts and the trip fee for work at your boat. A diagnosis is at least $300 for each engine; then you get a written estimate for the repair, and nothing is done without your OK.
-
-

#208 Common question asks
What is the difference between repairing a diesel engine and rebuilding it?
-

A repair fixes the part that failed, such as an injector, a pump or a gasket. A rebuild takes the engine apart and renews its worn internal parts, such as rings, bearings and gaskets, with any machining done by a machine shop. We tell you which one your engine needs after the diagnosis, with a written estimate.
-
-

#206 Common question asks
Should I rebuild or repower my diesel engine?
-

It depends on the engine's condition, its hours and what parts for it cost. We check compression, the fuel and cooling systems and the oil, then give you a written estimate for each option, so you can compare a rebuild with a replacement engine before anything is done.
-





