Home Repair

Boat Fuel Pump Repair

Boat fuel pump repair in Long Beach and San Pedro: pressure tests, marine fuel pump replacement, fuel polishing and ethanol checks for gas and diesel boats.

  • 3 services
  • Labor $150/hr
  • Trip fee from $30
  • At your slip or in the shop
View as Grid List

3 Items

Set Descending Direction
  1. Fuel Line & Primer Bulb Inspection
    Rating:
    100%
    $150 /hr
    Usually 1–2 hours
  2. Fuel Polishing & Micro-Filtration
    Rating:
    100%
    $150 /hr
    Usually 2–4 hours
  3. Marine Fuel Pump Diagnostics & Replacement
    Rating:
    100%
    $150 /hr
    Usually 1–2 hours
per page

Boat Fuel Pump Repair in Long Beach and San Pedro

We diagnose and repair boat fuel pumps and fuel systems at your slip, dock or storage yard from Marina del Rey to Newport Beach, or at our San Pedro shop. That covers gasoline and diesel boats, from the tank to the engine.

What the work covers

Marine fuel pump diagnostics and replacement starts with tests of fuel pressure, the pump's electrical supply and the fuel path, so a good pump is not replaced by mistake. On gasoline boats we fit marine, ignition-protected pumps only, never automotive ones. Parts are quoted with the job.

Fuel polishing and micro-filtration cleans the fuel in the tank, removing the water, sludge and growth that keep plugging filters. It helps most on diesel tanks and on boats that sit.

Marine fuel system safety and ethanol defense is an inspection of fuel lines, primer bulbs and fittings, with steps against ethanol damage.

If fuel reaches the engine and it still runs poorly, see carburetor repair and injector repair.

When to call

  • The engine starts and then dies, or loses power at higher speed
  • Hard starting after the boat has sat
  • A primer bulb that will not firm up, or one that is cracked
  • Water or dirt in the fuel filter bowl
  • A fuel smell in the bilge or engine compartment. Leave the engine off until the leak is found, and air out the boat.

Questions about boat fuel pumps

Why does my engine lose power at higher speed?

Fuel starvation is a common cause: a clogged filter, a pinched line, a stuck anti-siphon valve or a blocked tank vent. On an outboard, if the engine picks up when you squeeze the primer bulb, look at the fuel supply first.

Why does ethanol fuel cause trouble in boats?

Ethanol blends take on water from damp air, and fuel that sits can separate or go stale. Older fuel hoses and primer bulbs can also soften or crack. Fresh fuel, a water separating filter and regular use all help.

Book a visit: submit a ticket with the boat, the engine, where it is kept and what it is doing, or call (562) 542-7296.

See also: outboard tank cap vent fuel starvation.

See also: outboard tank cap vent fuel starvation.

Questions

Items 11 to 20 of 21 total

Page
Show per page
  1. #720 Common question asks Dec 15, 2025

    What is included in a fuel line and primer bulb safety inspection?

    1. Fryderyk Florczak answers Dec 15, 2025

      The inspection includes checking fuel hoses, primer bulbs, fittings, clamps, fuel filters, and connections from the tank to the engine. We look for leaks, air intrusion, improper routing, and verify correct hose type and installation for marine use.

  2. #718 Common question asks Dec 15, 2025

    Do you check for ethanol-related fuel line damage?

    1. Fryderyk Florczak answers Dec 15, 2025

      Yes. Ethanol-blended fuel is a major cause of hose breakdown. We look for swelling, softness, cracking and a collapsing inner liner, and check the hose markings to confirm it is marine fuel hose. Replacement hose is USCG Type A1-15 low-permeation fuel hose.

  3. #716 Common question asks Dec 15, 2025

    What signs indicate that my fuel line or primer bulb needs replacement?

    1. Fryderyk Florczak answers Dec 15, 2025

      Common warning signs include a fuel smell, visible cracks, a hose that is stiff or soft, fuel leaks, a collapsing primer bulb, or hard starting. If your primer bulb does not stay firm, it is often a sign of internal failure or air getting in. If you smell raw fuel, do not start the engine: ventilate the boat and have it checked.

  4. #714 Common question asks Dec 15, 2025

    Why is fuel line and primer bulb inspection important for boat safety?

    1. Fryderyk Florczak answers Dec 15, 2025

      Fuel lines and primer bulbs degrade over time from heat, ethanol and UV. Cracked or soft hoses can leak fuel and vapor, raising the risk of fire or engine failure. An inspection finds worn hoses, bulbs and clamps before they leak or fail.

  5. #134 Common question asks Jun 20, 2025

    Do fuel pump repairs come with a warranty?

    1. Lukas answers Jun 20, 2025

      Yes. Our workmanship is warranted for 90 days from the invoice date; new pumps and filters carry their manufacturer's warranty. The invoice lists the work done and the parts installed, for your maintenance records.

  6. #132 Common question asks Jun 20, 2025

    Do you use marine-rated parts during repairs?

    1. Lukas answers Jun 20, 2025

      Yes. On gasoline boats we install only marine-rated, ignition-protected fuel pumps and fuel hose that meets Coast Guard rules, never automotive parts, because a spark or a fuel leak in the engine compartment can start a fire or an explosion.

  7. #130 Common question asks Jun 20, 2025

    How much does marine fuel pump repair cost?

    1. Lukas answers Jun 20, 2025

      Labor is $150 an hour, plus a one-way trip fee by distance for work at your boat ($30 in San Pedro up to $110 in Newport Beach). Most fuel pump replacements take 1 to 2 hours plus the pump itself; EFI high-pressure pumps and diesel injection pumps cost more in parts and are quoted after diagnosis. You get a written estimate before any work starts.

  8. #128 Common question asks Jun 20, 2025

    Can you diagnose fuel delivery problems at the dock?

    1. Lukas answers Jun 20, 2025

      Absolutely. We perform pressure tests, fuel line inspections, and flow checks to find clogs, air leaks, or failing components. Most issues can be diagnosed during a single visit.

  9. #126 Common question asks Jun 20, 2025

    Do you work on diesel and gasoline fuel systems?

    1. Lukas answers Jun 20, 2025

      Yes, we service both gasoline and diesel marine fuel systems. We handle low-pressure lift pumps, high-pressure injection pumps, filters, lines, and fuel/water separators. All work is done to marine safety standards.

  10. #124 Common question asks Jun 20, 2025

    What are the signs of a failing fuel pump on a boat?

    1. Lukas answers Jun 20, 2025

      Engine sputtering, difficulty starting, sudden shutdowns, or lack of power under load are common symptoms. If your engine stalls after running for a few minutes, your fuel pump may be failing or clogged.

Items 11 to 20 of 21 total

Page
Show per page