Home Repair

Boat Fiberglass Repair

Gelcoat and small non-structural fiberglass repairs in Long Beach: chips, scratches, cosmetic cracks and dock rash, color-matched to your boat. Get a quote.

  • 4 services
  • Labor $150/hr
  • Trip fee from $30
  • At your slip or in the shop
View as Grid List

4 Items

Set Descending Direction
  1. Gelcoat & Cosmetic Fiberglass Repair
    Rating:
    100%
    $150 /hr
    Quoted after inspection
  2. Gelcoat Color Matching & Scratch Restoration
    Rating:
    100%
    $150 /hr
    Usually 2–4 hours
  3. Swim Platform Extension & Repair
    Rating:
    100%
    $150 /hr
    Quoted after inspection
  4. Transom Repair: Engine Removal and Refit
    Rating:
    100%
    $150 /hr
    Quoted after inspection
per page

Boat Fiberglass Repair in Long Beach and San Pedro

We repair fiberglass and gelcoat damage at your slip, dock or storage yard from Marina del Rey to Newport Beach, or at our San Pedro shop. That covers cosmetic chips, scratches and cracks in the gelcoat and small non-structural fiberglass repairs; structural hull, transom and deck work is referred to a boatyard.

What the work covers

  • Gelcoat and cosmetic fiberglass repair: chips, cosmetic cracks and small dings in the hull and deck. Delamination and other structural damage are referred to a boatyard.
  • Gelcoat color matching and scratch restoration for scratches, gouges and chips, with the color matched to your boat.
  • Transom repair: engine removal and refit. On outboard and sterndrive boats the transom carries the load of the engine or drive, so a weak transom needs attention early. A boatyard rebuilds the transom; we check it, take the engine and drive off and refit them afterwards.
  • Swim platform repair for cracked, loose or damaged bolt-on platforms, and bolt-on extensions. Anything glassed into the hull, and work on the transom core, is referred to a boatyard.

If the damage came from a collision, see insurance repair estimates: we document the damage with photos and give you a written estimate to send to your insurer.

Signs of fiberglass damage

  • Spider cracks in the gelcoat, often around fittings and corners
  • Soft or spongy spots when you walk on the deck
  • The transom flexes or the engine mount moves under load
  • Chips and gouges from docking, trailering or an impact
  • Water weeping from cracks or around fittings
  • A swim platform that is cracked, loose or moves

Questions about fiberglass repair

Is a gelcoat crack always structural?

Not always. Some cracks stay in the gelcoat, and we repair those. Others go into the fiberglass underneath and point to flexing or impact damage; that is structural work, which we refer to a boatyard. We look at what is behind the crack before quoting the repair.

Why do soft spots matter?

Many decks and transoms have a core between layers of fiberglass. When water gets in through fittings or cracks, the core can soften or rot over time, and the damage often spreads. Catching it early usually keeps the repair smaller. Core repairs are structural work, which a boatyard does.

Book a visit: submit a ticket with the boat, where it is kept and what the damage looks like, or call (562) 542-7296.

See also: swim platform damage or extension planning the stern upgrade.

See also: soft spots and delamination in fiberglass hulls what to know.

Questions

Items 21 to 28 of 28 total

Page
Show per page
  1. #798 Common question asks Dec 16, 2025

    What are the signs that my transom needs structural repair?

    1. Fryderyk Florczak answers Dec 16, 2025

      Common signs are cracks around the engine mount, flexing when you trim the motor or run under load, water coming in around the bolts, loose mounting bolts or unusual vibration. A soft or weakened transom is a safety risk, so have it checked before you run the boat again.

  2. #176 Common question asks Jun 21, 2025

    Can you repair impact damage from trailering or docking?

    1. Lukas answers Jun 21, 2025

      Yes, when the damage is cosmetic: chips, scratches and spider cracks in the gelcoat from trailer rollers, dock strikes or boat lifts. Crushed fiberglass, or cracked fiberglass that flexes, is structural damage, and we refer it to a boatyard.

  3. #174 Common question asks Jun 21, 2025

    What causes fiberglass to crack or delaminate?

    1. Lukas answers Jun 21, 2025

      Common causes include impact damage, prolonged sun exposure, water intrusion, and aging resins. Poor previous repairs or improper maintenance can also lead to delamination or gelcoat cracks.

  4. #172 Common question asks Jun 21, 2025

    Do you fix fiberglass delamination on older hulls?

    1. Lukas answers Jun 21, 2025

      No. Delamination is structural work, and we refer it to a boatyard. If we find it while repairing gelcoat, we stop and tell you before going further.

  5. #170 Common question asks Jun 21, 2025

    How much does fiberglass hull repair typically cost?

    1. Lukas answers Jun 21, 2025

      Labor is $150 an hour, plus materials and the trip fee for work at your boat. Every fiberglass job is different, so we look at the damage first and give you a written estimate; nothing is done without your OK. Repairs below the waterline need the boat out of the water.

  6. #168 Common question asks Jun 21, 2025

    Can you match the original gelcoat color after repair?

    1. Lukas answers Jun 21, 2025

      Yes. We tint the gelcoat to match your hull as closely as possible, whether it is a factory or a custom color. On older, faded gelcoat a slight difference can remain, and we tell you before we start.

  7. #166 Common question asks Jun 21, 2025

    Do you repair fiberglass cracks below the waterline?

    1. Lukas answers Jun 21, 2025

      Yes, for cosmetic gelcoat damage, once the boat is out of the water: at our shop for a trailer boat, or at a boatyard, where the haul-out and yard charges are yours and listed on the estimate. Cracks below the waterline that go into the laminate are often structural, and we refer those to a boatyard.

  8. #164 Common question asks Jun 21, 2025

    Do fiberglass repairs come with a warranty?

    1. Lukas answers Jun 21, 2025

      Yes. Our workmanship is warranted for 90 days from the invoice date, and the resins and gelcoat we use carry their manufacturer's warranty.

Items 21 to 28 of 28 total

Page
Show per page