Why is my marine toilet not flushing properly?

Weak or no flushing could be caused by clogged intake lines, a worn-out pump, or blocked discharge hoses. We inspect the full system and restore proper operation with marine-grade parts.

Do you repair both manual and electric marine toilets?

Yes – we service all types of marine heads including manual pump toilets, electric flush units, and vacuum systems. We carry parts for Jabsco, Dometic, Raritan, and more.

Why does my marine head smell even after flushing?

Persistent odor often means backflow, biofilm buildup, or failing vent hoses. We clean the system, replace hoses if needed, and install anti-siphon valves to eliminate smell and keep your cabin fresh.

How much does marine toilet repair or replacement cost?

Basic repairs start at $150. Full toilet replacement or hose system overhaul can range from $400–$1,200 depending on access, model, and plumbing configuration. We provide upfront quotes.

Can you clear a clogged marine toilet without damaging the plumbing?

Yes – we use safe, non-damaging techniques to clear clogs caused by toilet paper, waste, or mineral buildup. We avoid harsh chemicals that can ruin hoses or seals.

Do you provide mobile marine toilet repair services dockside?

Absolutely. We offer mobile toilet repair and sanitation system diagnostics throughout marinas in Los Angeles and Orange County. Fast, discreet, and hygienic service at your slip.

Do you install odor-free upgrades or holding tank filters?

Yes – we install carbon vent filters, new sanitation hoses, and odor-blocking loop vents. We can also upgrade your holding tank setup for easier pumping and maintenance.

Do you install watermakers on sailboats, powerboats, and long-range yachts?

Yes — we install reverse-osmosis marine watermakers on cruising sailboats, sportfishers, trawlers, and long-range yachts. Each system is sized for your freshwater needs and onboard power capacity.

Can you install or service a watermaker directly at my slip?

Absolutely — we provide dockside installation and maintenance in Marina del Rey, Long Beach, San Pedro, Wilmington, and nearby California marinas.

How much freshwater can a marine watermaker produce per hour?

Most systems produce 20–60 gallons per hour, while high-output units can exceed 100 GPH. We match the system to your cruising style and tank capacity.

Is a watermaker reliable for trips to Catalina or extended Pacific cruising?

Yes — modern watermakers are extremely reliable for Catalina runs, Baja trips, and long offshore routes, provided they are installed correctly and receive regular flushing and maintenance.

Can you integrate the watermaker with my existing plumbing and tank sensors?

Yes — we integrate the desalinator with your freshwater manifolds, tank sensors, pressure pumps, pre-filters, and electrical system, ensuring smooth operation.

How much power does a marine watermaker need?

Most systems run on 12V, 24V, or AC power, with energy draw depending on output. We evaluate your battery bank, alternator, generator, and inverter to choose the most efficient setup.

Do you provide full maintenance, membrane replacement, and troubleshooting?

Yes — we offer complete watermaker service, including membrane replacement, pickling, pump rebuilds, filter changes, leak checks, and performance tuning.

How do I know if my vacuum flush system needs service?

Signs include slow flushing, unusual noises, leaks around seals, or persistent odors. Regular inspection and maintenance prevent failures and maintain sanitary operation.

What does a vacuum flush system seal service include?

Our service includes inspecting all seals, replacing worn or damaged gaskets, lubricating components, and testing the system for proper vacuum pressure and leak-free operation.

Can a faulty vacuum flush seal damage my boat?

Yes, leaks can cause water intrusion, corrosion, and odors inside the boat. Prompt seal replacement and maintenance protect your vessel and ensure reliable operation.

How often should vacuum flush seals be inspected or replaced?

We recommend checking seals at least once a year or every 100–150 operating hours. High-use or saltwater boats may require more frequent inspections to prevent system failures.

Is service required for both manual and electric vacuum flush systems?

Yes, both types rely on proper sealing. Regular maintenance ensures smooth operation, prevents leaks, and extends the life of all system components.

Can vacuum flush system maintenance improve efficiency?

Absolutely. Well-maintained seals reduce suction loss, improve flushing performance, and minimize odors, ensuring the system runs reliably and efficiently.

Toilet repair boat

Get your toilet back in shipshape with our high-quality toilet repair boat products. We offer a wide selection of tools and parts to help you tackle any toilet maintenance or repair project with ease.

Whether you're dealing with a clogged toilet, a leaking pipe, or a broken flush mechanism, our toilet repair boat category has everything you need to solve the problem quickly and effectively. From replacement flappers and fill valves to plumber's snakes and wrenches, we've got you covered.

Our products are made from durable materials that are built to last, ensuring that your toilet will continue to function smoothly for years to come. With easy-to-follow installation instructions, even DIY beginners can confidently take on toilet repairs.

Don't let a faulty toilet disrupt your daily routine. Browse our toilet repair boat category today and find the perfect solution to keep your bathroom in top condition. With our affordable prices and reliable products, maintaining your toilet has never been easier.

Now Shopping by

Price $150.00 - $159.99 Remove This Item

Clear All

We can't find products matching the selection.

Questions